Self-builder dry toilets kit in stainless steel with 20 liter stainless steel bucket.

Please note: There is no support or board in this set. This product is designed for the user to make their own dry toilet with boards, scraps of wood or old furniture that they provide themselves.

Set of three stainless steel pieces allowing you to make your own dry toilet.

This kit includes:

- A stainless steel lid for a 20 liter bucket.

Dimensions : diam 34 cm x H 3.5 cm

Weight: 0.5 kg

- A stainless steel bib diameter 27.5 cm.

Dimensions: diam. 27.5cm x H 10cm.
Small external return of 5 mm all around the upper edge to facilitate blocking of the bib.

Weight: 0.350 kg

- A 20 liter stainless steel bucket.

Dimensions: lower diameter 26.5 cm / upper diameter 34.4 cm x H 31.4 cm.

Total dimensions with handle extended vertically: L 39.5 cm x W 34.4 cm x H 49.4 cm.

Weight: 2 kg.


Weight of the whole: 2,850 kg.

PLEASE NOTE, THIS 20 LITER BUCKET IS ONLY DEDICATED TO THE MANUFACTURE OF YOUR PERSONAL DRY TOILET.
IT IS NOT SUITABLE FOR USE WITH TOILETS OF OUR MANUFACTURE.

We strongly recommend the use of a stainless steel bib in dry toilets.

In fact, this makes it possible to avoid any leaks between the seat and the bucket and also to use the entire useful volume of the bucket while maintaining a comfortable distance of around ten centimeters between the seat and the contents. It thus optimizes the volume of your bucket.


Advice :

We recommend that you wait until you receive this kit before starting the design of your dry toilet.
It is advisable to trace the toilet hole from the bib positioned on the board or using the template provided with the kit so as not to end up with a hole that is too large. This can happen over a few millimeters.
Find the assembly instructions on the “Attached documents” tab of this page.